JTFire-rated glass Get a quote
WhatsAppGet a quote

Fire-rated glass that holds for 120 minutes.60 minutes.

Glass doors and screens, supplied and installed to the SCDF Fire Code.

Get a quote
Finished work

Rated for fire. Clear as day.

Office entrance: fire-rated glass with stainless capping finish
Office entranceStainless capping
Corridor screen: fire-rated glass with stainless capping finish
Corridor screenStainless capping
Terrace doors: fire-rated glass with powder coat finish
Terrace doorsPowder coat
Corridor door: fire-rated glass with powder coat finish
Corridor doorPowder coat
Furnace testJT glass doorset mounted in a fire-test furnace before the testThe same doorset glowing during the furnace test
Fire test

Two hours of fire. Still closed.

000minIn the furnace
20°CStandard curve
1 hrRating needed

Scroll to run the clock. Rated doorsets are tested against the standard fire curve: 945°C at one hour, 1,049°C at two.

The range

Glass only. Two ratings.

Full specs
1-hour doorset
01

1-hour doorset

For corridors, lobbies and exits rated at one hour.

  • Rating60 minutes
  • LeavesSingle or double
  • FinishPowder coat or stainless
  • ProofCoC under PLS
2-hour doorset
02

2-hour doorset

Where the Fire Code asks for two hours.

  • Rating120 minutes
  • LeavesSingle or double
  • FinishPowder coat or stainless
  • ProofCoC under PLS
Framed glass screen
03

Framed glass screen

Fixed glazing that keeps the sightline and the rating.

  • Rating1 or 2 hours
  • BuildSteel-framed
  • Pairs withMatching doorsets
  • ProofCoC under PLS
Finishes
04

Finishes

Two finishes, both on the same certified systems.

  • Option APowder coat
  • Option BStainless steel capping
  • GlassClear, fire-rated
  • TimberNever
Anatomy of a doorset

Every part is rated.

Tap a point on the door.

  • Clear glazing rated with the doorset, for 1 or 2 hours. It stays in the frame while the fire is on the other side.

  • A steel frame with powder coat or a stainless steel capping finish, like this one.

  • Seals that swell with heat and close the gaps where the leaves meet the frame.

  • Handles, hinges and locks that belong to the certified system, not off the shelf.

  • The fixed glass above is part of the same rated doorset, so the whole opening holds.

Double fire-rated glass doors with stainless steel capping and a glazed transom
Before and after

Same exit. Now clear.

A solid steel exit door, replaced with fire-rated glass. Drag to compare.

Before: solid grey steel exit door
After: fire-rated glass exit door showing the staircase
BeforeAfter
Install protocol

Four steps. No shortcuts.

12
Hours, set by the Fire Code
01Specify

Match the rating

The Fire Code sets the rating for each opening. We confirm 1 hour or 2 before anything is made.

Close-up of an intumescent seal set into a brushed steel frame beside the glass edge
02Install

Fit to the system

Frame alignment, clearances, fixings and perimeter seals, exactly as the certified system specifies.

03Test

It must close itself

The self-closer has to shut the door fully, from any angle, over the latch. Every time.

SERIAL LABELon the frame
04Certify

Label and hand over

We check the PLS serial label and hand over the Certificate of Conformity with the install records.

Questions

Straight answers.

Do you make timber fire doors?

No. JT does glass only: fire-rated glass doors and framed glass screens.

Which ratings do you supply?

1-hour and 2-hour doorsets and screens, matched to what the Fire Code requires at each opening.

How do I know a door is certified?

A certified doorset carries a PLS serial label. We hand over its Certificate of Conformity with the installation records.

Can a solid fire door be replaced with glass?

Often, yes. That is the before and after above. We confirm the rating that opening needs first.

Who is behind JT?

JT works alongside its sister company Dengya Glass, in glass supply and installation since 2006.

Get a quote

Need a door that passes inspection?

Send a photo of the opening. We'll tell you the rating it needs and what it takes.